CE Certified Steel Warehouse Shelving Factories & Supplier

Steel warehouse storage systems exported to the European Union must align with the Construction Products Regulation (CPR 305/2011/EU) where applicable, alongside comprehensive harmonized standards. Specifically, structural static calculation must satisfy EN 15512 (Principles for structural design of adjustable pallet racking), structural clearances must verify against EN 15620 (Tolerances, deformations and clearances), safe operational loading notices must adhere to EN 15635 (Application and maintenance of storage equipment), and seismic validation follows EN 16681. HEDA Shelves provides verifiable CE Certification No. 2435-CPR-8605159 and comprehensive engineering structural files.

Standard EUR-1 pallets (1200 mm depth × 800 mm width) and industrial pallets (1200 mm × 1000 mm) require calculated clearances under EN 15620. For standard 3-pallet wide bays, clear beam lengths are fabricated at 2700 mm (allowing 75 mm side and inter-pallet clearances), with frame depths commonly set at 1100 mm. This leaves an optimal 50 mm pallet overhang front and back, preventing misplacement during forklift placement and securing full structural engagement on cold-formed step or box beams.

Cold rooms and deep-freeze logistics facilities generate severe operational condensation during defrosting cycles, creating accelerated rust hazards on bare steel edges. HEDA Shelves employs a systematic multi-stage chemical pre-treatment—comprising immersion degreasing, acid pickling, and micro-crystalline iron phosphating—followed by automated electrostatic application of low-temperature-elastic thermoset polyester powder coating (cured at 180°C - 200°C to 70–80 micron thickness). For high-humidity refrigerated zones or outdoor timber/pipe cantilever racks, hot-dip galvanizing conforming to ISO 1461 is applied.

To produce an accurate CAD floor plan, 3D render, and structural load analysis, our engineering team requires: (1) Scaled warehouse architectural layout (DWG or vector PDF) highlighting building columns, dock doors, egress routes, and floor expansion joints; (2) Clear ceiling height to the lowest sprinkler pipe or truss; (3) Pallet specifications (dimensions, maximum dynamic weight, overhang, bottom runner direction); (4) Material handling equipment specs (forklift mast closed/open heights, right-angle stacking aisle AST); (5) Environmental requirements (sub-zero temperatures, seismic zones, or floor slab load capacity).

Industrial storage frames and beams are susceptible to salt air oxidation and impact abrasion during 30 to 40 days of sea freight. All HEDA Shelves shipments feature heavy-gauge corrugated corner guards, multi-layer stretch wrapping, structural steel channel strapping, and color-coded pallet groupings with labeled piece counts. Small accessories (bolts, locking pins, base shims, levelling plates) arrive sealed in heavy timber crates or heavy-duty woven polypropylene bags with packing slips, enabling direct offloading and immediate site assembly.

Yes. We regularly serve racking installation companies, equipment distributors, and system integrators across Europe under OEM and ODM agreements. This program encompasses custom profile stamping, client-specified RAL color configurations (e.g., RAL 5015 Blue, RAL 2004 Orange, RAL 7035 Grey), custom packaging badges, barcoding systems, and third-party engineering calculations tailored for seamless European resale.